Blogs

1、Centrifugal pumps are strictly prohibited from idling, the minimum flow rate when the pump is running: the highest efficiency point 30%~35%.2、Can be conveyed with a small number of particles and knotted products of the medium (solid content ≤ 10%), prohibited the conveyance of a large number of bubbles (permissible limit: gas content < 5%) of

How can we check the failure of acid-resistant pumps? Introduced as followsAcid-resistant pumps in operation often occurs some abnormal phenomena, the equipment appears to be running, but in many cases, there have been signs of accidents, to be able to detect the precursors of abnormalities as soon as possible is an important factor in the

1, the main points of material selection.Acetic acid, this substance is one of the most corrosive of the organic acids. For example, ordinary steel, steel in some solutions will not be corroded, but it will be severely corroded in all concentrations and temperatures of acetic acid. Stainless steel is also a common metal material, while

Eleven common failures of fluorine lined pumps and how to deal with them. 1, the shaft seal is hot.Treatment:Seal is too tight or friction, please loosen the seal, check the water seal pipe. 2、The rotor honeycomb is too large.Treatment:(1)Improper operation of the gas liner pump, must be operated in accordance with the regulations, so that